Implementing Extended Producer Responsibility Legislation

The goal of this article is to contribute to the understanding of how the multiple, and sometimes conflicting, stakeholder perspectives and prevailing conditions (economic, geographic, etc.) in the implementation locality shape extended producer responsibility (EPR) “on the ground.” We provide an in‐depth examination of the implementation dimension of EPR in a specific case study by examining concrete activities at the operational front of the collection and recycling system, and probing the varying stakeholder preferences that have driven a specific system to its status quo. To this end, we conduct a detailed case study of the Washington State EPR implementation for electronic waste. We provide an overview of various stakeholder perspectives and their implications for the attainment of EPR policy objectives in practice. These findings shed light on the intrinsic complexity of EPR implementation. We conclude with recommendations on how to achieve effective and efficient EPR implementation, including improving design incentives, incorporating reuse and refurbishing, expanding product scope, managing downstream material flows, and promoting operational efficiency via fair cost allocation design.     

From Legal Transplants to Sustainable Transition

Extended producer responsibility (EPR), which assigns significant responsibility to producers to take back their end‐of‐life products to create incentives for redesign of products with lower life cycle environmental impacts, has come to a crossroad facing a trade‐off between the original innovation‐oriented regime design and the cost‐efficiency challenges in practice. This is particularly true in its implementation in non‐Organization for Economic Co‐operation and Development (OECD) countries as they are trying to transplant the “best practices” from OECD countries, for there is increasing skepticism as to whether EPR is suitable for developing countries at all. As an important producer of electronic products and destination of electronic waste (e‐waste) flows in the world, China has been expected to play a vital role in the evolution of global governance based on the idea of EPR, either to create new ways for producers to perform their end‐of‐life strategies, or to reshape the mode of production and consumption with its fast‐growing market. However, the establishment of EPR in China has been long and full of difficulties. This article reviews the status and trends in the establishment of an EPR system for waste electrical and electronic equipment (WEEE) management in China. We use the framework of a multilevel perspective of transition theory in our analysis to characterize the complex interactions among various agents in the evolution of the Chinese system from initial innovation‐oriented design to the current efficiency‐oriented version. An ongoing research framework for evaluation of the EPR program in China is outlined as the research agenda in coming years.     

Business‐to‐Business Information Technology User Practices at End of Life in the United Kingdom,Germany, and France

Business‐to‐business (B2B) electronics account for a significant volume of the electrical and electronic equipment (EEE) put on the market. Very little B2B waste electrical and electronic equipment (WEEE) is reported as collected in the European Union (EU) in compliance with the WEEE Directive, which uses the policy principle of extended producer responsibility (EPR) to ensure that WEEE is managed correctly. This presents a barrier to parties looking for access to the waste. Company practice dictates the channels into which B2B WEEE flows following primary use. This article presents a study that engaged with company actors directly to get a better understanding of business information technology (IT) EEE asset management. Data were collected to determine the barriers current practice could present to the collection of B2B IT EEE at end of life and the implications of these for the development of policies and strategies for EPR. A questionnaire was developed and data were gathered from organizations in three EU countries—the United Kingdom, Germany, and France—stratified by size. Some notable findings were that there are several routes by which end‐of‐life B2B WEEE can flow. The recycling and refurbishment of B2B IT units at end of use was shown to be commonplace, but it is likely that these units enter streams where they are not reported. The actors disposing of their units did not have information on the management or disposition of these streams. It is concluded that to achieve the goals of EPR for B2B IT WEEE, the networks and the operational practices of these streams need to be better understood when developing strategies and policies.     

Linking Material Flow Analysis with Environmental Impact Potential

Technology transition can have significant implications on the evolution of environmental impact potential of disposed electronics over time. Considering technology transition, we quantify the temporal behavior of ecological and human health impact potential from select heavy metals in electronic waste (e‐waste). The case study analyzes product substitution effects in two electronic cohorts from the U.S. market: (1) computers (laptops substituting for desktops) and (2) televisions (flat‐panel liquid crystal displays [LCDs] and plasma displays substituting for cathode‐ray tubes [CRTs]). Quantities of end‐of‐life (EoL) units to year 2030 are forecasted by the unique combination of dynamic material flow analysis, logistic trend analysis, and product lifespan calibration methods. Metal content from EoL units are assessed via a pathway and effect model using USETox? characterization factors to determine the toxicity potential attributed to heavy metal releases into different media (e.g., air, water, and soil) as an indicator of environmental burden. Results show high impact materials such as lead, nickel, and zinc cause changes in human health toxicity potential and copper causes changes in ecological toxicity potential. Effects of dematerialization, such as reduced metal content in laptops over desktops, provide some positive benefits in toxicity potential per product. However, from a market perspective, emerging e‐waste quantities created by increasing per capita penetration rates of electronics and increasing population will offset gains in environmental performance at the product level. The resulting analysis provides guidance on the timing expected for emerging EoL units and an indication of high impact potential materials requiring pollution prevention as product substitution occurs.     

Prediction of quantitative intrathoracic fluid volume to diagnose pulmonary oedema using LabVIEW

Pulmonary oedema is a life-threatening disease that requires special attention in the area of research and clinical diagnosis. Computer-based techniques are rarely used to quantify the intrathoracic fluid volume (IFV) for diagnostic purposes. This paper discusses a software program developed to detect and diagnose pulmonary oedema using LabVIEW. The software runs on anthropometric dimensions and physiological parameters, mainly transthoracic electrical impedance (TEI). This technique is accurate and faster than existing manual techniques. The LabVIEW software was used to compute the parameters required to quantify IFV. An equation relating per cent control and IFV was obtained. The results of predicted TEI and measured TEI were compared with previously reported data to validate the developed program. It was found that the predicted values of TEI obtained from the computer-based technique were much closer to the measured values of TEI. Six new subjects were enrolled to measure and predict transthoracic impedance and hence to quantify IFV. A similar difference was also observed in the measured and predicted values of TEI for the new subjects.     

Verification of accuracy and validity of gait phase detection system using motion sensors for applying walking assistive FES

In this study, we have analysed heel strike (HS) and toe off (TO) of normal individuals and hemiplegic patients, taking advantage of output curves acquired from various sensors, and verified the validity of sensor detection methods and their effectiveness when they were used for hemiplegic gaits. Gait phase detections using three different motion sensors were valid, since they all had reliabilities more than 95%, when compared with foot velocity algorithm. Results showed that the tilt sensor and the gyrosensor could detect gait phase more accurately in normal individuals. Vertical acceleration could detect HS most accurately in hemiplegic patient group A. The gyrosensor could detect HS and TO most accurately in hemiplegic patient groups A and B. The detection of TO from all sensor signals was valid in both the patient groups A and B. However, the vertical acceleration detected HS validly in patient group A and the gyrosensor detected HS validly in patient group B.     

How does muscle stiffness affect the internal deformations within the soft tissue layers of the buttocks under constant loading?

Mechanical loading of soft tissues covering bony prominences can cause skeletal muscle damage, ultimately resulting in a severe pressure ulcer termed deep tissue injury (DTI). Deformation plays an important role in the aetiology of DTI. Therefore, it is essential to minimise internal muscle deformations in subjects at risk of DTI. As an example, spinal cord-injured (SCI) individuals exhibit structural changes leading to a decrease in muscle thickness and stiffness, which subsequently increase the tissue deformations. In the present study, an animal-specific finite element model, where the geometry and boundary conditions were derived from magnetic resonance images, was developed. It was used to investigate the internal deformations in the muscle, fat and skin layers of the porcine buttocks during loading. The model indicated the presence of large deformations in both the muscle and the fat layers, with maximum shear strains up to 0.65 in muscle tissue and 0.63 in fat. Furthermore, a sensitivity analysis showed that the tissue deformations depend considerably on the relative stiffness values of the different tissues. For example, a change in muscle stiffness had a large effect on the muscle deformations. A 50% decrease in stiffness caused an increase in maximum shear strain from 0.65 to 0.99, whereas a 50% increase in stiffness resulted in a decrease in maximum shear strain from 0.65 to 0.49. These results indicate the importance of restoring tissue properties after SCI, with the use of, for example, electrical stimulation, to prevent the development of DTI.     

Aromatase inhibitors in ovarian stimulation

The selective estrogen receptor modulator, clomiphene citrate (CC), has been the principal drug used for induction of ovulation in women with polycystic ovarian syndrome (PCOS). CC is associated with adverse side effects and low pregnancy rates attributed to long-lasting estrogen receptor depletion. Anastrozole and letrozole are potent, non-steroidal, reversible aromatase inhibitors, developed for postmenopausal breast cancer therapy. We hypothesized that aromatase inhibitors could mimic the action of CC in reducing estrogen negative feedback on follicle stimulating hormone (FSH) secretion, without depleting estrogen receptors. In a series of preliminary studies, we reported the success of aromatase inhibition in inducing ovulation in anovulatory women with PCOS. Moreover, we showed that concomitant use of aromatase inhibitors resulted in a significant reduction of the FSH dose needed for controlled ovarian hyperstimulation. We suggest that aromatase inhibitors act through an increase in endogenous gonadotropin secretion as well as through increased intraovarian androgen levels that may increase ovarian FSH receptors. Recently, we demonstrated the safety of aromatase inhibitors in pregnancy outcome studies examining spontaneous pregnancy loss, multiple pregnancy rates and congenital anomalies compared to a control group of infertility patients treated with CC.     

Met23Lys mutation in subunit gamma of FOF1-ATP synthase from Rhodobacter capsulatus impairs the activation of ATP hydrolysis by protonmotive force

H⁺-F_OF₁-ATP synthase couples proton flow through its membrane portion, F_O, to the synthesis of ATP in its headpiece, F₁. Upon reversal of the reaction the enzyme functions as a proton pumping ATPase. Even in the simplest bacterial enzyme the ATPase activity is regulated by several mechanisms, involving inhibition by MgADP, conformational transitions of the ε subunit, and activation by protonmotive force. Here we report that the Met23Lys mutation in the γ subunit of the Rhodobacter capsulatus ATP synthase significantly impaired the activation of ATP hydrolysis by protonmotive force. The impairment in the mutant was due to faster enzyme deactivation that was particularly evident at low ATP/ADP ratio. We suggest that the electrostatic interaction of the introduced γLys23 with the DELSEED region of subunit β stabilized the ADP-inhibited state of the enzyme by hindering the rotation of subunit γ rotation which is necessary for the activation.     

Heparin/polypyrrole (PPy) composite on gold-coated matrix for the neurite outgrowth of PC12 cells by electrical stimulation

A heparin/polypyrrole (PPy) composite, an electrical conducting polymer, was designed to enhance the interactions between a gold-coated matrix and nerve cells, with the cell (PC12 cells) interactions investigated under different conditions, both with and without electrical stimulation. The heparin concentration in the composites increased with increasing current density under the preparation condition, indicating that the heparin concentration in the composite could be controlled by managing the current density. Optical imaging showed that PC12 cells well attached to the PPy surfaces covered with heparin, but were poorly interacted to PPy surfaces without the heparin and gold coated matrix. The neurite length of the PC12 cells on the surfaces with an electrical stimulation (100 mV for 1h) significantly increased, with a median length of 77.5 μm; whereas, that without electrical stimulation was 10∼20 μm. Therefore, the heparin/polypyrrole (PPy) composite may provide insight for the development of an ideal nerve guidance channel.